NICE_FLO4R-S , 4 Button Remote Control
Free Standard Delivery Australia-wide only
- Nice FLO2R-S (4 Button) Remote
- Free Battery
- Free Coding Instructions
Warranty - 01 year manufacturer's warranty
Nice branded remote control for use with Nice automation systems. Designed to operate opening devices for gates, garage doors, roller shutters, etc. Part of the Nice FLO series of transmitters.
Please Note: Check that this is the correct remote you need as the FLOR-S series look very similar but do not contain the switches.
|Programming Methods||Program with receiver, Program with existing remote, Program via dipswitch|
|Remote Programming Instructions||
First check that the transmitter is operating by pressing one of the keys and check that the LED flashes at the same time (= transmission performed).
“FLO” type transmitters are programmed by setting the same On and Off combination that is on the receiver with the dip-switch.
Approximately 100 to 200 m outside and up to 35 m inside
- Remote Frequency: 433.92 MHz
- Coding Type: Fixed code (contains DIP switches inside for programmable coding, 1024 combinations)
- 12V(23A) Battery and instructions included
- Can be attached to a keyring (not supplied)
- Nice Flor-S FLO1-S
- Nice Flor-S FLO2-S
- Nice Flor-S FLO4-S
- Compatible with ATA TrioCode Products
Dimensions: 3.92W x 7.35L x 1.53D cm