ELSEMA GLR43302, 2 CHANNEL GIGALINK™ SERIES 433MHZ RECEIVER - 11-28VAC/DC IN

Descriptions 

This Gigalink™ receiver gives you two relay outputs that can switch currents up to 8 Amps each. There is an on-board switch to test each relay and a LED to indicate when the relay is "On". The receiver has a power "On" LED to indicate that the correct supply voltage is connected.

The receiver's micro-controller can store unlimited number of transmitters with a high security level using the encrypted 32-bit digital code. Included with the receiver is the Gigalink™ programming cable.

FEATURES

  • Two channel receiver with relay outputs
  • Over 4 billion code combinations
  • Supply voltage can be AC or DC
  • Highly sensitive receiver input stage
  • Crystal controlled for high reliability
  • Can store unlimited number of transmitters
  • Momentary, Latching and Security Latching output modes can be selected by the user

SPECIFICATIONS

  • Supply Voltage: 11.0 - 28 VAC/DC. Can use Elsema DC or AC power supply, 12PP1000 or 24PP.
  • Current Consumption: 16mA standby
  • Receiving Frequency: 433.920MHz (other frequencies available on request)
  • Sensitivity: Better than 1µV (for relay output to switch on)
  • Relay Output: Two change over relay outputs, rated at 8 Amps / 240VAC
  • Antenna: Elsema ANT 433MHz series
  • Dimensions: 96 x 70 x 20mm
  • Useable Transmitters: All Elsema type GLT433 series

Warranty 

01 year warranty is a guarantee from the  manufacturer 

https://youtu.be/X1V0ReHyHY0

https://youtu.be/8VkWCMCLe6Q

 

(GLR43302)

SKU GLR43302
Brand Elsema
Shipping Weight 0.1000kg
Shipping Width 0.120m
Shipping Height 0.010m
Shipping Length 0.150m
Shipping Cubic 0.000180000m3

Be The First To Review This Product!

Help other Automatic Doors Australia users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category